The front lip for BMW 4 Series G22 is the accessory that best fits the front end of the new 4 Series. The large vertical kidney grille calls for a bumper with more presence, and this front splitter gives it that: a straight center section and two side pieces with angled fins that emphasize the car's width and visually ground it. It is an aftermarket accessory in M Performance style, made of ABS, designed for the M Sport bumper of the 4 Series Coupé G22 and the 4 Series Convertible G23. DRX Parts is not affiliated with BMW; the M Sport and M Performance designations are used solely to describe the style and compatibility.

What makes this front lip special

• M Performance style: 3-piece spoiler with angled side fins that runs along the entire M Sport bumper for a low, wide, and sporty front end
• Design specific to the 4 Series: follows the curvature of the G22 and G23 bumper and matches the vertical kidney grille, mirrors, and Shadow Line trim
• High-strength ABS: withstands temperature changes, light impacts, pressure washing, and the sun without cracking or losing its shine. No fiberglass that breaks in the cold
• Gloss black finish applied at the factory with primer, a color coat, and UV-filtered clear coat. It arrives ready to install
• No-drill mounting: attaches directly to the lower lip of the original bumper with the included hardware and clips. No cutting or modifying the bumper
• Protects the lower part of the bumper against curbs and garage ramps
• Physical stock in Valencia: orders confirmed before 18:00 Monday to Friday are shipped the same day
• 3-year statutory warranty and 14 days to return it if it has not been installed

Who is it designed for?

If you have a BMW 4 Series G22 Coupé or G23 Convertible (420i, 420d, 430i, 430d, M440i or M440d) with the M Sport package and are looking for a lower and more aggressive front end without irreversible modifications, this lip is the most direct option. It is ideal for:

• 4 Series G22 or G23 owners who want a front end with more character without losing the quality look of the factory
• Fans of the M Performance, M Sport, or Black Pack style who value the gloss black
• Those who are installing a full body kit on their 4 Series and want to start with the most visible piece
• Those who prefer to install parts at home without relying on a workshop
• Buyers looking for a good value for money with a warranty and a local seller in Spain

✅ YES, it is compatible with:

• BMW 4 Series G22 (Coupé, 2 doors) and G23 (Convertible), years 2020, 2021, 2022 and 2023 (pre-LCI)
• Versions with the M Sport package
• BMW M440i / M440d, also xDrive
• Gasoline engines 420i, 430i with M Sport bumper
• Diesel engines 420d, 430d with M Sport bumper
• Versions xDrive of all the above engines with M Sport bumper

If you have doubts about whether your car is compatible, write to us at info@drxparts.com with a photo of the front bumper and we will confirm it for you the same day.

Why ABS and not fiberglass?

ABS (Acrylonitrile Butadiene Styrene) is the most used thermoplastic in automotive exterior trim due to its properties:

• Withstands sudden temperature changes without deforming, from winters at -20 °C to extreme summers
• Resists light impacts without cracking (unlike fiberglass, which is brittle)
• Maintains color with prolonged exposure to UV rays
• Withstands common cleaning products without damaging the finish
• Withstands pressure washing at a normal distance

About the gloss black finish

The finish is applied using a multi-layer painting process: adhesion primer, color coat, and protective clear coat with UV filter. The lip arrives ready to install, you do not need to paint it, prime it, or apply additional clear coat. If you prefer another finish, the ABS can be painted the color of your bodywork.

The installation is simple even if you have never worked on a car. You do not need a workshop or to remove the bumper. Just basic DIY tools.

Tools needed

• Screwdriver or Torx wrench (depending on the fasteners)
• Optional: ramp, hydraulic jack, or jack stands for greater convenience
• Optional: microfiber cloth and alcohol to clean the mounting area
• Optional: 3M double-sided tape to reinforce the bond

Detailed steps

1. Slightly raise the front part of the car with a ramp, jack, or jack stands to access the lower lip of the bumper
2. Clean the contact area of the bumper with a microfiber cloth and alcohol
3. Dry fit the 3 pieces of the lip (center and two sides) to check the fit before securing anything
4. Align the center piece with the lower edge of the bumper and secure it with the included hardware and clips
5. Mount the side pieces making sure that the line with the center piece is continuous and that the end fins are symmetrical
6. Tighten the fasteners with a light torque, without forcing, checking the fit along the entire lip
7. Check the result from several angles before lowering the car

⏱ Estimated total time: 20-30 minutes (if it is your first time it may take you a little longer to do it carefully)

If you have doubts during installation, write to us at info@drxparts.com and we will help you the same day.

• Locatable Spanish company: DRX PARTS, S.L., with NIF, address, phone number, and hours published in the Legal Notice. We issue the invoice
• Physical stock in Valencia: it is not dropshipping. The piece leaves our warehouse the same day if you confirm before 18:00
• Compatibility confirmed before buying: send us a photo of the bumper and we will tell you if it fits
• 3-year statutory warranty and 14 days return, managed by us, in Spanish
• Complete kit: the three pieces, hardware, and clips. You do not have to buy anything else

Shipping options

• Spain and Portugal, standard shipping (3-5 business days): €14.99
• Spain and Portugal, express shipping (1-2 business days): €19.99
• European Union: standard €19.99 or express €24.99
• Balearic Islands, Canary Islands, Ceuta and Melilla: same rates, slightly longer timeframe; in the Canary Islands, Ceuta and Melilla local taxes may apply
• Reinforced packaging with impact protection

Returns

• 14 calendar days from receipt to return it without the need for justification
• The product must be uninstalled and in its original packaging
• The return shipping costs are borne by the customer, unless the product arrives defective or damaged
• Refund by the same payment method in a maximum of 14 days

Warranty

• 3-year statutory warranty of conformity
• Covers manufacturing, paint, and fitment defects
• Does not cover damage from accidents, improper use, or incorrect installation

Customer service

• 📧 Email: info@drxparts.com
• 📞 Phone: +34 609 53 25 14, Monday to Friday from 9:00 to 18:00
• 🌐 Contact form

Full conditions in the shipping policy and the returns policy.

Is it an original BMW or M Performance part?

No. It is an aftermarket accessory made of ABS and designed for the M Sport bumper of the 4 Series G22 and G23. The M Performance designation describes its style.

Do I need to paint it?

No. It arrives in gloss black ready to install. It does not require primer, paint, or additional clear coat.

Do I need to drill the bumper?

No. It attaches to the lower lip with the included hardware and clips.

Does it fit my M440i?

Yes. The M440i, the M440d, and all versions of the G22 and G23 with the M Sport package share the same front bumper.

Does it fit my 420i or 420d?

Yes, as long as it has the M Sport package. With the stock, Advantage, or Sport Line bumper, it does not fit.

Is it compatible with the 4 Series Convertible?

Yes. The G23 Convertible mounts the same M Sport bumper as the G22 Coupé.

Does it fit the 5-door 4 Series Gran Coupé G26?

No. This lip is only for the G22 Coupé and the G23 Convertible. The G26 Gran Coupé has a bumper with different dimensions.

Does it fit the G22 LCI / 2024 facelift?

No. This lip is for the pre-LCI G22/G23 (2020-2023). The LCI facelift mounts a different bumper.

How long does it take to arrive?

It leaves the same day if you confirm before 18:00 Monday to Friday. In Spain and Portugal, 1-2 business days with express shipping or 3-5 with standard.

What if it does not fit my car?

You have 14 days to return it without installing it. Before buying, check the compatibility list or send us a photo and we will confirm it for you.

Can it withstand pressure washing?

Yes. As with any painted part, avoid bringing the gun closer than 30 cm.

See all FAQs →