The front lip for BMW 1 Series F20 pre-LCI is the accessory that changes the front end of the first F20/F21 1 Series with M Sport package the most. The M Sport bumper already has large, pronounced air intakes, and this front splitter finishes them off: the lip runs along the entire lower edge and the two side flaps are placed under the outer air intakes, visually widening the car and bringing it closer to the ground. It is an aftermarket accessory in M Performance style, designed for the pre-LCI M Sport bumper of the F20 and F21. DRX Parts is not affiliated with BMW; the M Sport and M Performance designations are used solely to describe the style and compatibility.

What makes this front lip special

• Complete 3-piece kit: one-piece lower lip plus two side flaps for the air intakes, for a comprehensive M Performance-style front end
• Design specific to the pre-LCI F20/F21: it follows the exact shape of the 2011 to 2015 M Sport bumper and matches the black kidney grille, halo headlights, and black mirrors
• Gloss piano black finish that matches black kidney grilles, diffusers, and dark wheels
• High-strength ABS plastic: withstands temperature changes, light scuffs, pressure washing, and the sun without cracking or losing its shine
• Unpainted: arrives with the final finish, ready to install
• Mounting without cutting the bumper: it attaches over the original lower lip. Reversible if you ever sell the car
• Protects the lower part of the bumper from curbs and garage ramps
• Physical stock in Valencia: orders confirmed before 18:00 from Monday to Friday are dispatched the same day
• 3-year statutory warranty and 14 days to return it if it has not been installed

Who is it designed for?

If you have a BMW 1 Series F20 or F21 pre-LCI (116i, 118i, 120i, 125i, 116d, 118d, 120d, 125d or M135i) with M Sport package and want a lower and more aggressive front end without irreversible modifications, this kit is the most direct option. It is ideal for:

• Owners of an F20/F21 M Sport 1 Series who want the M Performance look without paying for the original part
• Fans of the Black Pack style: black kidney grilles, black mirrors, and dark wheels
• Those who are installing a full body kit and want to start with the most visible part
• Those who prefer to install parts at home without relying on a workshop
• Buyers looking for good value for money with a warranty and a local seller in Spain

✅ YES, it is compatible with:

• BMW 1 Series F20 (5-door) pre-LCI, from 2011 to early 2015
• BMW 1 Series F21 (3-door) pre-LCI, from 2012 to early 2015
• Versions with M Sport package and M135i
• Gasoline engines 114i, 116i, 118i, 120i, 125i, M135i
• Diesel engines 114d, 116d, 118d, 120d, 125d
• Versions xDrive with M Sport bumper

How do I know if my 1 Series is pre-LCI? The pre-LCI (up to early 2015) has headlights with round rings and taillights that extend towards the tailgate. The LCI has narrower LED headlights and L-shaped taillights. The M Sport bumper is recognizable by the large air intakes at the ends with a horizontal slat. If you have doubts, write to us at info@drxparts.com with a photo of the front end and we will confirm it for you the same day.

Why ABS and not fiberglass?

ABS is the most widely used thermoplastic in automotive exterior trim due to its properties:

• Withstands sudden temperature changes without deforming
• Resists light impacts without cracking, unlike fiberglass, which is brittle
• Maintains its color with prolonged exposure to the sun
• Withstands common cleaning products without damaging the finish
• Withstands pressure washing at a normal distance

About the gloss black finish

The finish is applied at the factory with a primer, a color coat, and a protective varnish with a UV filter. The kit arrives ready to install: you do not need to paint or varnish it. If you prefer another finish, the ABS can be painted the color of your bodywork.

The installation is simple even if you have never worked on a car. You do not need a workshop or to remove the bumper. Just basic tools.

Tools needed

• Screwdriver or Torx wrench (depending on the fasteners)
• Optional: ramp, hydraulic jack, or jack stands for greater convenience
• Optional: microfiber cloth and isopropyl alcohol to clean the area
• Optional: 3M double-sided tape to reinforce the bond

Detailed steps

1. Slightly raise the front end of the car to comfortably access the lower lip of the bumper
2. Clean the contact areas of the lower lip and the side air intakes with a cloth and alcohol
3. Dry fit the lip to check the fit before securing anything
4. Center the lip under the license plate, aligned with the lower edge of the bumper, and secure it starting from the center and moving towards the ends
5. Place the two side flaps under the outer air intakes, checking that they are symmetrical and follow the line of the lip
6. Tighten the fasteners with a light torque, without forcing, checking the fit along the entire bumper
7. Check the result from several angles before lowering the car

⏱ Estimated total time: 30-45 minutes (if it is your first time, it may take you a little longer to do it carefully)

If you have doubts during assembly, write to us at info@drxparts.com and we will help you the same day.

• Locatable Spanish company: DRX PARTS, S.L., with NIF, address, phone number, and hours published in the Legal Notice. We issue the invoice
• Physical stock in Valencia: it is not dropshipping. The part leaves our warehouse the same day if you confirm before 18:00
• Compatibility confirmed before buying: send us a photo of the front end and we will tell you if it fits
• 3-year statutory warranty and 14 days to return it, managed by us, in Spanish
• Complete kit: lip, two side flaps, and fasteners. You do not need to buy anything else

Shipping options

• Spain and Portugal, standard shipping (3-5 business days): €14.99
• Spain and Portugal, express shipping (1-2 business days): €19.99
• European Union: standard €19.99 or express €24.99
• Balearic Islands, Canary Islands, Ceuta, and Melilla: same rates, slightly longer timeframe; in the Canary Islands, Ceuta, and Melilla, local taxes may apply
• Reinforced packaging with impact protection

Returns

• 14 calendar days from receipt to return it without the need for justification
• The product must be uninstalled and in its original packaging
• Return shipping costs are borne by the customer, unless the product arrives defective or damaged
• Refund by the same payment method within a maximum of 14 days

Warranty

• 3-year statutory warranty of conformity
• Covers manufacturing, paint, and fitment defects
• Does not cover damage from accidents, improper use, or incorrect installation

Customer service

• 📧 Email: info@drxparts.com
• 📞 Phone: +34 609 53 25 14, Monday to Friday from 9:00 to 18:00
• 🌐 Contact form

Full conditions in the shipping policy and the returns policy.

Is it an original BMW M Performance part?

No. It is an aftermarket accessory in M Performance style, designed for the M Sport bumper of the pre-LCI 1 Series F20 and F21.

Does it fit my 1 Series without the M Sport package?

No. The standard, Sport Line, and Urban Line bumpers have a different shape. This kit is only for the M Sport bumper and the M135i.

Does it fit the F20 LCI from 2015 to 2019 or the M140i?

No. The LCI facelift mounts a different bumper. This kit is only for the pre-LCI, from 2011 to early 2015.

Does it fit my M135i?

Yes. The pre-LCI M135i mounts the same M Sport-style bumper.

Is it compatible with the 3-door F21?

Yes. The 3-door F21 and the 5-door F20 share the same front bumper.

Do I need to paint it?

No. It arrives in gloss black ready to install.

Does the bumper need to be cut or drilled?

Nothing needs to be cut. The kit attaches over the lower lip and under the air intakes of the original bumper.

Can I install only the lip without the flaps?

Yes. The three pieces are independent, so you can install only the lip and add the flaps whenever you want.

How long does it take to arrive?

It is dispatched the same day if you confirm before 18:00 from Monday to Friday. In Spain and Portugal, 1-2 business days with express shipping or 3-5 with standard.

What if it does not fit my car?

You have 14 days to return it without installing it. Before buying, check the compatibility or send us a photo and we will confirm it.

Can it withstand pressure washing?

Yes. As with any painted part, avoid bringing the gun closer than 30 cm.

See all frequently asked questions →